Intel® Quartus® Prime Pro Edition User Guide: Platform Designer

ID 683609
Date 12/20/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

6.4.3.3.3. Avalon® Data Pattern Checker IP Control and Status Registers

Table 144.   Avalon® Data Pattern Generator and Checker IP Control and Status Register MapShows the offset for the control and status registers. Each register is 32 bits wide.

Offset

Register Name

base + 0

status

base + 1

control

base + 2

Reserved

base + 3

base + 4

base + 5

exception_descriptor

base + 6

indirect_select

base + 7

indirect_count
Table 145.   Avalon® Data Pattern Checker IP Status Register Bits

Bits

Name

Access

Description

[15:0]

ID

RO

Contains a constant value of 0x65.

[23:16]

NUMCHANNELS

RO

The configured number of channels.

[30:24]

NUMSYMBOLS

RO

The configured number of symbols per beat.

[31]

SUPPORTPACKETS

RO

A value of 1 indicates packet support.

Table 146.   Avalon® Data Pattern Checker IP Control Register Bits

Bits

Name

Access

Description

[0]

ENABLE

RW

Setting this bit to 1 enables the Data Pattern Checker IP.

[7:1]

Reserved

[16:8]

THROTTLE

RW

Specifies the throttle value which can be between 0–256, inclusively. Platform Designer uses this value in conjunction with a pseudo-random number generator to throttle the data generation rate.

Setting THROTTLE to 0 stops the Avalon® Data Pattern Checker IP. Setting it to 256 causes the Avalon® Data Pattern Checker IP to run at full throttle. Values between 0–256 result in a data rate proportional to the throttle value.

[17]

SOFT RESET

RW

When this bit is set to 1, all internal counters and statistics are reset. Write 0 to this bit to exit reset.

[31:18]

Reserved

If there is no exception, reading the exception_descriptor register bit register returns 0.

Table 147.   exception_descriptor Register Bits

Bits

Name

Access

Description

[0]

DATA ERROR

RO

A value of 1 indicates that an error is detected in the incoming data.

[1]

MISSINGSOP

RO

A value of 1 indicates missing start-of-packet.

[2]

MISSINGEOP

RO

A value of 1 indicates missing end-of-packet.

[7:3]

Reserved

[15:8]

SIGNALLED ERROR

RO

The value of the error signal.

[23:16]

Reserved

[31:24]

CHANNEL

RO

The channel on which the exception was detected.

Table 148.   indirect_select Register Bits

Bit

Bits Name

Access

Description

[7:0]

INDIRECT CHANNEL

RW

Specifies the channel number that applies to the INDIRECT PACKET COUNT, INDIRECT SYMBOL COUNT, and INDIRECT ERROR COUNT registers.

[15:8]

Reserved

[31:16]

INDIRECT ERROR

RO

The number of data errors that occurred on the channel specified by INDIRECT CHANNEL.

Table 149.   indirect_count Register Bits

Bit

Bits Name

Access

Description

[15:0]

INDIRECT PACKET COUNT

RO

The number of data packets received on the channel specified by INDIRECT CHANNEL.

[31:16]

INDIRECT SYMBOL COUNT

RO

The number of symbols received on the channel specified by INDIRECT CHANNEL.