Arria® 10 SoC Boot User Guide

Download PDF
ID 683735
Date 4/03/2019
Public
Document Table of Contents
Document Table of Contents x
1. Arria 10 SoC Boot User Guide
1. Arria 10 SoC Boot User Guide x
1.1. Boot Process 1.2. Boot Stages 1.3. Boot Devices 1.4. Second-Stage Boot Loader Support Package Generator Tool 1.5. Generating a Boot Loader with an External Flash Boot Device 1.6. Boot and FPGA Configuration 1.7. Boot Debugging 1.8. Appendix A: Building the UEFI Boot Loader 1.9. Revision History for Arria 10 SoC Boot User Guide
1.1. Boot Process x
1.1.1. Typical Boot Flow 1.1.2. Bare Metal Boot Flow 1.1.3. Custom Boot Loader
1.2. Boot Stages x
1.2.1. Reset 1.2.2. First Stage: Boot ROM 1.2.3. Second Stage: Boot Loader (U-Boot)
1.2.2. First Stage: Boot ROM x
1.2.2.1. Boot ROM Flow
1.2.3. Second Stage: Boot Loader (U-Boot) x
1.2.3.1. Second-Stage Boot Flow
1.2.3.1. Second-Stage Boot Flow x
1.2.3.1.1. Typical Boot Flow (Non-Secure) 1.2.3.1.2. Secure Boot Flow
1.3. Boot Devices x
1.3.1. Boot Select 1.3.2. Flash Memory Devices for Booting 1.3.3. Booting From FPGA
1.3.2. Flash Memory Devices for Booting x
1.3.2.1. Quad SPI Flash Devices 1.3.2.2. SD/MMC Flash Devices 1.3.2.3. NAND Flash Devices
1.4. Second-Stage Boot Loader Support Package Generator Tool x
1.4.1. Boot Loader Generation and Flow
1.4.1. Boot Loader Generation and Flow x
1.4.1.1. Step 1: Compiling the FPGA Design 1.4.1.2. Step 2: Hardware Hand-off Files 1.4.1.3. Step 3: Generating the Boot Loader Source 1.4.1.4. Boot Loader Generator Tool: BSP Editor
1.5. Generating a Boot Loader with an External Flash Boot Device x
1.5.1. Prerequisites 1.5.2. Boot Loader Generation Example Using an SD/MMC Controller 1.5.3. Boot Loader Generation Example Using a QSPI Flash Controller 1.5.4. Boot Loader Generation Example Using a NAND Flash Controller
1.7. Boot Debugging x
1.7.1. Cold Boot Debug 1.7.2. Warm Boot Debug 1.7.3. Using the Boot ROM and Boot Loader Debug Registers 1.7.4. Boot Flash Device Issues 1.7.5. HPS Boot Loader Debugging
1.8. Appendix A: Building the UEFI Boot Loader x
1.8.1. Prerequisites 1.8.2. Supported Compiler Toolchains 1.8.3. Obtaining the UEFI Source Code 1.8.4. Compiling the UEFI Source Code with the Linaro Tool Chain 1.8.5. Compiling the UEFI Source Code with the ARM Tool Chain 1.8.6. UEFI Generated Files
1. Arria 10 SoC Boot User Guide

1.3.3. Booting From FPGA

In the figure below, the FPGA is configured first through one of its non-HPS configuration sources. The CSS block configures the FPGA fabric as well as the FPGA I/O, shared I/O and hard memory controller I/O. The HPS executes the second-stage boot loader from the FPGA. In this situation, the HPS should not be released from reset until the FPGA is powered on and programmed. Once the FPGA is in user mode and the HPS has been released from reset, the boot ROM code begins executing. The HPS boot ROM code executes the second-stage boot loader from the FPGA fabric over the HPS-to-FPGA bridge.

Figure 18. Boot From FPGA Flow
Level Two Title