Arria® 10 SoC Boot User Guide

Download PDF
ID 683735
Date 4/03/2019
Public
Document Table of Contents
Document Table of Contents x
1. Arria 10 SoC Boot User Guide
1. Arria 10 SoC Boot User Guide x
1.1. Boot Process 1.2. Boot Stages 1.3. Boot Devices 1.4. Second-Stage Boot Loader Support Package Generator Tool 1.5. Generating a Boot Loader with an External Flash Boot Device 1.6. Boot and FPGA Configuration 1.7. Boot Debugging 1.8. Appendix A: Building the UEFI Boot Loader 1.9. Revision History for Arria 10 SoC Boot User Guide
1.1. Boot Process x
1.1.1. Typical Boot Flow 1.1.2. Bare Metal Boot Flow 1.1.3. Custom Boot Loader
1.2. Boot Stages x
1.2.1. Reset 1.2.2. First Stage: Boot ROM 1.2.3. Second Stage: Boot Loader (U-Boot)
1.2.2. First Stage: Boot ROM x
1.2.2.1. Boot ROM Flow
1.2.3. Second Stage: Boot Loader (U-Boot) x
1.2.3.1. Second-Stage Boot Flow
1.2.3.1. Second-Stage Boot Flow x
1.2.3.1.1. Typical Boot Flow (Non-Secure) 1.2.3.1.2. Secure Boot Flow
1.3. Boot Devices x
1.3.1. Boot Select 1.3.2. Flash Memory Devices for Booting 1.3.3. Booting From FPGA
1.3.2. Flash Memory Devices for Booting x
1.3.2.1. Quad SPI Flash Devices 1.3.2.2. SD/MMC Flash Devices 1.3.2.3. NAND Flash Devices
1.4. Second-Stage Boot Loader Support Package Generator Tool x
1.4.1. Boot Loader Generation and Flow
1.4.1. Boot Loader Generation and Flow x
1.4.1.1. Step 1: Compiling the FPGA Design 1.4.1.2. Step 2: Hardware Hand-off Files 1.4.1.3. Step 3: Generating the Boot Loader Source 1.4.1.4. Boot Loader Generator Tool: BSP Editor
1.5. Generating a Boot Loader with an External Flash Boot Device x
1.5.1. Prerequisites 1.5.2. Boot Loader Generation Example Using an SD/MMC Controller 1.5.3. Boot Loader Generation Example Using a QSPI Flash Controller 1.5.4. Boot Loader Generation Example Using a NAND Flash Controller
1.7. Boot Debugging x
1.7.1. Cold Boot Debug 1.7.2. Warm Boot Debug 1.7.3. Using the Boot ROM and Boot Loader Debug Registers 1.7.4. Boot Flash Device Issues 1.7.5. HPS Boot Loader Debugging
1.8. Appendix A: Building the UEFI Boot Loader x
1.8.1. Prerequisites 1.8.2. Supported Compiler Toolchains 1.8.3. Obtaining the UEFI Source Code 1.8.4. Compiling the UEFI Source Code with the Linaro Tool Chain 1.8.5. Compiling the UEFI Source Code with the ARM Tool Chain 1.8.6. UEFI Generated Files
1. Arria 10 SoC Boot User Guide

1.4.1. Boot Loader Generation and Flow

Generating a boot loader involves several steps to produce a final bootable image.

Each step is dependent on the previous one. Either the associated Intel® Complete Design Suite (ACDS) or SoC EDS tool is used to generate information required for the following dependent steps. See the table below for a list of steps and associated tools:

Table 4.  Boot Loader Generation Stages and Tools
Steps Required Tool
Step 1: Compiling the FPGA Design Quartus® Prime
Step 2: Identifying the hardware hard processor system (HPS) hand-off files Quartus® Prime
Step 3: Generating and building a boot loader source SoC EDS tool chain and BSP Editor
The following figure depicts the complete boot loader generation flow using U-Boot.
Note: A similar flow is available for a UEFI boot loader. Refer to the "Appendix A: Building a UEFI Boot Loader" section.
Figure 19. Arria 10 Boot Loader Generation Flow
Related Information
Level Two Title