AN 738: Intel® Arria® 10 Device Design Guidelines

ID 683555
Date 6/30/2017
Public
Document Table of Contents

1.5.7. I/O Simultaneous Switching Noise

Table 47.  I/O Simultaneous Switching Noise Checklist
Number Done? Checklist Item
1   Analyze the design for possible SSN problems.
2   Reduce the number of pins that switch the voltage level at exactly the same time whenever possible.
3   Use differential I/O standards and lower-voltage standards for high-switching I/Os.
4   Use lower drive strengths for high-switching I/Os. The default drive strength setting might be higher than your design requires.
5   Reduce the number of simultaneously switching output pins within each bank. Spread output pins across multiple banks if possible.
6   Spread switching I/Os evenly throughout the bank to reduce the number of aggressors in a given area to reduce SSN (when bank usage is substantially below 100%).
7   Separate simultaneously switching pins from input pins that are susceptible to SSN.
8   Place important clock and asynchronous control signals near ground signals and away from large switching buses.
9   Avoid using I/O pins one or two pins away from PLL power supply pins for high-switching or high-drive strength pins.
10   Use staggered output delays to shift the output signals through time, or use adjustable slew rate settings.

SSN is a concern when too many I/Os (in close proximity) change voltage levels at the same time. Plan the I/O and clock connections according to the recommendations.

For more information, refer to “ Arria® 10 I/O Features” for details about the features you can use.