Intel® Cyclone® 10 GX Device Family Pin Connection Guidelines

Download PDF
ID 683417
Date 10/29/2021
Public
Document Table of Contents
Document Table of Contents x
Intel® Cyclone® 10 GX Device Family Pin Connection Guidelines
Intel® Cyclone® 10 GX Device Family Pin Connection Guidelines x
Intel® Cyclone® 10 GX Pin Connection Guidelines Power Supply Sharing Guidelines for Intel® Cyclone® 10 GX Devices Document Revision History for the Intel® Cyclone® 10 GX Device Family Pin Connection Guidelines
Intel® Cyclone® 10 GX Pin Connection Guidelines x
Clock and PLL Pins Dedicated Configuration/JTAG Pins Optional/Dual-Purpose Configuration Pins 3V Compatible I/O Pins Differential I/O Pins External Memory Interface Pins Voltage Sensor Pins Reference Pins Supply Pins Transceiver Pins Notes to Intel® Cyclone® 10 GX Pin Connection Guidelines
Power Supply Sharing Guidelines for Intel® Cyclone® 10 GX Devices x
Example 1— Intel® Cyclone® 10 GX Example 2— Intel® Cyclone® 10 GX
Intel® Cyclone® 10 GX Device Family Pin Connection Guidelines

Example 2— Intel® Cyclone® 10 GX

Table 12.  Power Supply Sharing Guidelines for Intel® Cyclone® 10 GX with Transceiver Data Rate <= 12.5 Gbps for Chip-to-Chip Applications (Transceiver Data Rate <= 6.6 Gbps for Backplane Applications)Example Requiring 3 Power Regulators
Power Pin Name Regulator Group Voltage Level (V) Supply Tolerance Power Source Regulator Sharing Notes
VCC 1 0.9 ±30 mV Switcher(*) Share —
VCCP
VCCERAM
VCCR_GXBL 2 1.03 ±30 mV Switcher(*) Share

Option provided for VCCR_GXB and VCCT_GXB to share the same regulator.

For designs that have high-current for VCCR_GXB or VCCT_GXB, you should consider the IR drop through the supply planes and compensate for it.

VCCT_GXBL
VCCBAT 3 Varies ± 5% (**) Switcher(*) Share if 1.8V Option provided for VCCBAT, VCCPT, VCCIO and VCCPGM to share the same regulator when all power rails require 1.8V. Depending on the regulator capabilities, you have the option to share this supply with multiple Intel® Cyclone® 10 GX devices.
VCCPT 1.8
VCCIO Varies
VCCPGM
VCCH_GXBL 1.8 Isolate Option provided to share VCCH_GXB and VCCA_PLL with the same regulator as VCCBAT, VCCPT, VCCIO, and VCCPGM when all power rails require 1.8V with a proper isolation filter.
VCCA_PLL

(*)When using a switcher to supply these voltages, the switcher must be a low noise switcher as defined in note 7 of the Notes to Intel® Cyclone® 10 GX Pin Connection Guidelines.

(**)The supported tolerance for the VCCIO power supply varies depending on the I/O standards. For more details, refer to the I/O standard specification in the Intel® Cyclone® 10 GX Device Datasheet. Use the EPE (Early Power Estimation) tool to assist in determining the power required for your specific design.

Each board design requires its own power analysis to determine the required power regulators needed to satisfy the specific board design requirements. An example block diagram using the Intel® Cyclone® 10 GX device is provided in Figure 2.

Figure 2. Example Power Supply Sharing Guidelines for Intel® Cyclone® 10 GX with Transceiver Data Rate <= 12.5 Gbps for Chip-to-Chip Applications (Transceiver Data Rate <= 6.6 Gbps for Backplane Applications)
Level Two Title