Visible to Intel only — GUID: mwh1410805294005
Ixiasoft
1.1. Features
1.2. Overview
1.3. Programming Single and Multiple Serial Configuration Devices with the Intel® FPGA Serial Flash Loader IP Core
1.4. Using the Intel® FPGA Serial Flash Loader IP Core in the Intel® Quartus® Prime Software
1.5. Generating .jic and .jam Programming Files in the Intel® Quartus® Prime Software
1.6. Programming Serial Configuration Devices with the Intel® Quartus® Prime Programmer
1.7. Features for Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices
1.8. Intel® FPGA Serial Flash Loader IP Core Parameter
1.9. Intel® FPGA Serial Flash Loader IP Core Signals
1.10. Document Revision History for AN 370: Using the Intel® FPGA Serial Flash Loader IP Core with the Intel® Quartus® Prime Software
Visible to Intel only — GUID: mwh1410805294005
Ixiasoft
1.4. Using the Intel® FPGA Serial Flash Loader IP Core in the Intel® Quartus® Prime Software
Use the Intel® FPGA Serial Flash Loader IP core to create a dedicated FPGA image that you use only when programming a serial configuration device. For example, configure your FPGA with this dedicated FPGA image only when you want to program the configuration device. After programming the serial configuration device, reconfigure your FPGA with your FPGA image that does not contain an Intel® FPGA Serial Flash Loader IP core.
Alternatively, you can instantiate the Intel® FPGA Serial Flash Loader IP core in your FPGA image. This allows you to program your serial configuration device at any time without interrupting your design. The internal logic can access and read and/or write the serial configuration device at any time using the Share ASMI interface with your design parameter in the Intel® FPGA Serial Flash Loader IP core.