P-Tile Avalon® Memory-mapped Intel® FPGA IP for PCI Express* User Guide

ID 683268
Date 7/14/2021
Public
Document Table of Contents

4.9. Configuration Output Interface

The Transaction Layer configuration output (tl_cfg) bus provides a subset of the information stored in the Configuration Space. Use this information in conjunction with the app_err* signals to understand TLP transmission problems.

Table 53.  Configuration Output Interface
Signal Name Direction Description Clock Domain EP/RP
tl_cfg_ctl_o[15:0] O Multiplexed data output from the register specified by tl_cfg_add_o[4:0]. The detailed information for each field in this bus is defined in the following table. p<n>_app_clk EP/RP
tl_cfg_add_o[4:0] O This address bus contains the index indicating which Configuration Space register information is being driven onto the tl_cfg_ctl_o[15:0] bits. p<n>_app_clk EP/RP

x16/x8: tl_cfg_func_o[2:0]

x4: NA

O Specifies the function whose Configuration Space register values are being driven out on tl_cfg_ctl_o[15:0].
  • 3'b000: Physical Function 0 (PF0)
  • 3'b001: PF1

and so on

Note: In the 19.4 release of Intel® Quartus® Prime, the P-Tile Avalon® -MM IP only supports PF0.
p<n>_app_clk EP/RP

The table below provides the tl_cfg_add_o[4:0] to tl_cfg_ctl_o[15:0] mapping.

Table 54.  Multiplexed Configuration Information Available on tl_cfg_ctl
tl_cfg_add_o[4:0] tl_cfg_ctl_o[15:8] tl_cfg_ctl_o[7:0]
5'h00

[15]: memory space enable

[14]: IDO completion enable

[13]: perr_en

[12]: serr_en

[11]: fatal_err_rpt_en

[10]: nonfatal_err_rpt_en

[9]: corr_err_rpt_en

[8]: unsupported_req_rpt_en

Device control:

[7]: bus master enable

[6]: extended tag enable

[5:3]: maximum read request size

[2:0]: maximum payload size

5'h01

[15]: IDO request enable

[14]: No Snoop enable

[13]: Relaxed Ordering enable

[12:8]: Device number

bus number
5'h02

[15]: pm_no_soft_rst

[14]: RCB control

[13]: Interrupt Request (IRQ) disable

[12:8]: PCIe Capability IRQ message number

[7:5]: reserved

[4]: system power control

[3:2]: system attention indicator control

[1:0]: system power indicator control

5'h03 Number of VFs [15:0]
5'h04

[15]: reserved

[14]: AtomicOP Egress Block field (cfg_atomic_egress_block)

[13:9]: ATS Smallest Translation Unit (STU)[4:0]

[8]: ATS cache enable

[7]: ARI forward enable

[6]: Atomic request enable

[5:3]: TPH ST mode

[2:1]: TPH enable

[0]: VF enable

5'h05
[15:12]: auto negotiation link speed. Link speed encoding values are:
  • Gen1 : 0x1
  • Gen2 : 0x2
  • Gen3 : 0x4
  • Gen4 : 0x8

[11:1]: Index of Start VF [10:0]

[0]: reserved

 
5'h06 MSI Address [15:0]
5'h07 MSI Address [31:16]
5'h08 MSI Address [47:32]
5'h09 MSI Address [63:48]
5'h0A MSI Mask [15:0]
5'h0B MSI Mask [31:16]
5'h0C

[15]: cfg_send_f_err

[14]: cfg_send_nf_err

[13]: cfg_send_cor_err

[12:8]: AER IRQ message number

[7]: Enable extended message data for MSI (cfg_msi_ext_data_en)

[6]: MSI-X func mask

[5]: MSI-X enable

[4:2]: Multiple MSI enable

[1]: 64-bit MSI

[0]: MSI enable

5'h0D MSI Data [15:0]  
5'h0E AER uncorrectable error mask [15:0]
5'h0F AER uncorrectable error mask [31:16]
5'h10 AER correctable error mask [15:0]
5'h11 AER correctable error mask [31:16]
5'h12 AER uncorrectable error severity [15:0]
5'h13 AER uncorrectable error severity [31:16]
5'h14 [15:8]: ACS Egress Control Register (cfg_acs_egress_ctrl_vec)

[7]: ACS function group enable (cfg_acs_func_grp_en)

[6]: ACS direct translated P2P enable (cfg_acs_p2p_direct_tranl_en)

[5]: ACS P2P egress control enable (cfg_acs_egress_ctrl_en)

[4]: ACS upstream forwarding enable (cfg_acs_up_forward_en)

[3]: ACS P2P completion redirect enable (cfg_acs_p2p_compl_redirect_en)

[2]: ACS P2P request redirect enable (cfg_acs_p2p_req_redirect_en)

[1]: ACS translation blocking enable (cfg_acs_at_blocking_en)

[0]: ACS source validation enable (RP) (cfg_acs_validation_en)

5'h15

[15]: reserved

[14]: 10-bit tag requester enable (cfg_10b_tag_req_en)

[13]: VF 10-bit tag requester enable (cfg_vf_10b_tag_req_en)

[12]: PRS_RESP_FAILURE (cfg_prs_response_failure)

[11]: PRS_UPRGI (cfg_prs_uprgi)

[10]: PRS_STOPPED (cfg_prs_stopped)

[9]: PRS_RESET (cfg_prs_reset)

[8]: PRS_ENABLE (cfg_prs_enable)

[7:3]: reserved

[2:0]: ARI function group (cfg_ari_func_grp)

5'h16 PRS_OUTSTANDING_ALLOCATION (cfg_prs_outstanding_allocation) [15:0]  
5'h17 PRS_OUTSTANDING_ALLOCATION (cfg_prs_outstanding_allocation) [31:16]  
5'h18

[15:10]: reserved

[9]: Disable autonomous generation of LTR clear message (cfg_disable_ltr_clr_msg)

[8]: LTR mechanism enable (cfg_ltr_m_en)

[7]: Infinite credits for Posted header

[6]: Infinite credits for Posted data

[5]: Infinite credits for Completion header

[4]: Infinite credits for Completion data

[3]: End-end TLP prefix blocking (cfg_end2end_tlp_pfx_blck)

[2]: PASID enable (cfg_pf_pasid_en)

[1]: Execute permission enable (cfg_pf_passid_execute_perm_en )

[0]: Privileged mode enable (cfg_pf_passid_priv_mode_en)

5'h19

[15:9]: reserved

[8]: Slot control attention button pressed enable (cfg_atten_button_pressed_en)

[7]: Slot control power fault detect enable (cfg_pwr_fault_det_en)

[6]: Slot control MRL sensor changed enable (cfg_mrl_sensor_chged_en)

[5]: Slot control presence detect changed enable (cfg_pre_det_chged_en)

[4]: Slot control hot plug interrupt enable (cfg_hp_int_en)

[3]: Slot control command completed interrupt enable (cfg_cmd_cpled_int_en)

[2]: Slot control DLL state change enable (cfg_dll_state_change_en)

[1]: Slot control accessed (cfg_hp_slot_ctrl_access)

[0]: PF’s SERR# enable (cfg_br_ctrl_serren)

5'h1A LTR maximum snoop latency register (cfg_ltr_max_latency[15:0])  
5'h1B LTR maximum no-snoop latency register (cfg_ltr_max_latency[31:16])  
5'h1C [15:8]: enabled Traffic Classes (TCs) (cfg_tc_enable[7:0])

[5:0]: auto negotiation link width

6’h01 = x1

6’h02 = x2

6’h04 = x4

6’h08 = x8

6’h10 = x16

5'h1D MSI Data[31:16]
5'h1E N/A
5'h1F N/A
Note:

The information on the Configuration Output (tl_cfg) bus is time-division multiplexed (TDM).

  • When tl_cfg_func[2:0] = 3'b000, tl_cfg_ctl[31:0] drive out the PF0 Configuration Space register values.
  • Then, tl_cfg_func[2:0] are incremented to 3'b001.
  • When tl_cfg_func[2:0] = 3'b001, tl_cfg_ctl[31:0] drive out the PF1 Configuration Space register values.
  • This pattern repeats to cover all enabled PFs.
  • The P-Tile Avalon® -MM IP for PCIe only supports PF0.
Figure 26. Configuration Output Interface Timing Diagram