PHY Lite for Parallel Interfaces Intel® FPGA IP User Guide

ID 683716
Date 12/13/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.2.4.2. Reconfiguration Features and Register Addressing

Each reconfigurable feature of the interface has a set of control registers with an associated memory address to store the reconfigurable settings; however, this address is placement dependent. If PHY Lite for Parallel Interfaces IPs and the External Memory Interface IPs share the same I/O column, you must track the addresses of the interface lanes and the pins.

The following two sets of control registers store the reconfiguration feature settings:

  • Control/status registers (CSR)—You can only read the values of these registers. The values are set through the IP parameters. The CSR registers contain the default setting in the IP.
  • Avalon® memory-mapped registers—You can read and write to these registers using Avalon® interface. Perform an RTL simulation to show an accurate timing which correlates to the hardware operation.