Intel® Agilex™ Configuration User Guide

ID 683673
Date 5/30/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.1.7.2. Designing with the PFL II IP Core for Avalon-ST Single Device Configuration

This section describes the procedures on how to use the PFL II IP core.

To target a MAX® II, MAX® V, or Intel® MAX® 10 device requires the use of Intel® Quartus® Prime Standard Edition whereas targeting a Intel® Agilex™ requires Intel® Quartus® Prime Pro Edition.

The process of creating the Avalon-ST single device configuration design targeting a MAX10/MAX V/MAX II device involves three steps.
  1. Generate the AVST design for the MAX device with the default option address.
  2. Create the Intel® Agilex™ .pof file in setting the appropriate option bits.
  3. Regenerate the Parallel Flash Loader II Intel FPGA IP (PFL II) with the option bits used to generate the Intel® Agilex™ .pof file and recompile the Intel® MAX® 10 design.

You can find an Intel® MAX® 10 system design example that implements the PFL II IP for AVST x32 configuration mode in the installer package of the Intel® Agilex™ F-Series Transceiver-SoC Development Kit.

Figure 26. Process for Using the PFL IP CoreFigure shows the process for using the PFL IP core, using MAX® II as an example.