Intel® FPGA Power and Thermal Calculator User Guide

ID 683445
Date 12/19/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.1. Intel® FPGA PTC Select Family Dialog Box

When you launch the Intel® FPGA Power and Thermal Calculator (PTC) standalone, or without an open Intel® Quartus® Prime project, the Select Family dialog box appears automatically to allow you to select the Intel® FPGA family for your Intel® FPGA PTC calculations.

When you launch the Intel® FPGA PTC embedded version with an open Intel® Quartus® Prime project, the Intel® FPGA PTC obtains the device information from the project. Alternatively, you can turn on Open an existing PTC file in this dialog box to load the power data for a previously saved design hierarchy.

Figure 14. Select Family Dialog Box


Select the desired device family, and click OK.

Note:
  1. Once you have selected a device family to model, you cannot change that selection unless you start a new Intel® FPGA PTC instance.
  2. Currently, the Intel® FPGA PTC supports the Intel® Agilex™ and Intel® Stratix® 10 FPGA device families. You will notice some differences on the Intel® FPGA PTC pages, depending on the device family selected.