INTEL DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH WILL BE UNINTERRUPTED OR ERROR-FREE. //**************************************************************** quartus-20.3-0.81fw-readme.txt Readme file for Intel(R) Quartus(R) Prime 20.3 Patch 0.81fw Copyright (C) Intel Corporation 2019 All right reserved. Patch created on July 7, 2022, 6:20 p.m. Patch Case#: 18022271517 Patches included: 0.44fw Patches conflicted: //**************************************************************** Description: This patch addresses the following problem - For Designs using Stratix 10 Remote System Update, Remote System Update may fall back to the Factory Slot if a Combined Application Image is corrupt. This patch also contains the following fixes from prior device firmware releases: 0.05fw This fixes a problem with Stratix 10 Provisioning firmware, which was non functional. 0.08fw This fixes a problem that may result in Stratix 10 reconfiguration or partial reconfiguration issues when SEU is enabled 0.34fw This fixes a configuration error seen during JTAG configuration for Agilex devices 0.44fw This fixes a configuration error on Stratix 10, which reports as Major error = 0xF004 & Minor error = 0x002d after reconfiguration. 0.48fw The patch fixes spurious SEU error reported on unused CRAM spare row. 0.66fw This patch is to fix fault injection debugger coordinates issue for SEU 0.69fw This is the firmware fix for the UIB timeout issue. 0.78fw This fixes a problem that may cause Stratix 10 reconfiguration to hang when a corrupted RBF is loaded, causing a HPS watchdog malfunction. Patch# 0.44fw: This fixes a configuration error on Stratix 10, which reports as Major error = 0xF004 & Minor error = 0x002d after reconfiguration. Caution - You must either have previously installed the Intel(R) Quartus(R) Prime 20.3 software or must install the Intel(R) Quartus(R) Prime 20.3 software before installing this patch. Otherwise, the patch will not be installed correctly and the Intel(R) Quartus(R) Prime software will not run properly. Note: - means this patch includes those patches. If you already installed those patches, you can safely install this new patch on top. - means this patch conflicts with those patches. If you have any of those patches installed, don't install this patch. Contact Intel for further support.